|
|
Discussion on Tie stall design
|
| Author |
Message |
Member: heidim
|
Posted on Monday, Jul 25, 2011 - 12:02 pm:
Hi. We have a nice cool quarry and a separate run-in shelter for our two horses and one mini to use most of the year. Beyond that, we'd like to construct a flexible stall area in our new pole building that can be adjusted for one, two or all three equines, in case one is injured or if all three need to get out of icy weather. We're thinking of using heavy tubular fencing panels for the base stall and fabricating a solid divider in the event we need to turn that stall into two or three tie stalls. Has anyone seen such an arrangement that works well? Open to all ideas.
|
Member: mrose
|
Posted on Monday, Jul 25, 2011 - 1:01 pm:
We have an addition to our barn that is a long shed row which can be divided into three 12 x 14' stalls. We used pipe panels for the divider walls. They are on a hinge like a heavy gate and can be folded back along the back wall to get them out of the way. We normally use the area for shavings and hay storage, but have used for stalls when needed. Each stall has a back door that opens to the outside pen as well as a front panel with a gate. The middle front panel is removed and stacked along the back wall and the other panels just fold back. The shed row has cement floor with mats on top and a large overhang over the front. It works very well and horses seem happy in it when we've used it for stalls.
|
Member: heidim
|
Posted on Wednesday, Jul 27, 2011 - 10:28 am:
Thanks for the ideas, Sara. I especially like the hinged-gate divider walls...pretty much the solution we are looking for.
|
Member: mrose
|
Posted on Wednesday, Jul 27, 2011 - 7:52 pm:
Good luck building. Ours has been very versatile.
|
|
|